Epoxy & Adhesives

Permatex® 2 Ton Epoxy

Features and Benefits:

Permatex’s Clear 2 Ton Epoxy is a general-purpose high strength epoxy designed to bond together ridged materials for a permanent hold. Repositionable up to 15 minutes and is clear in color. Bonds ceramics, fiberglass metal concrete, and more!

• Repositionable high strength adhesive; bonds together rigid materials
• Sets in 30 minutes / Cures in 1 hour for multiple repairs
• Specially formulated for high clarity and impact strength
• Gap-filling and non-shrinking formula
• Resists salt solution, unleaded gasoline, mineral spirits, oil and anti-freeze
• PSI Strength: 3,400

DIRECTIONS

• For best results: Roughen, remove any grease and oil, clean and dry surfaces to be joined or repaired.
• Remove plastic mixing paddle from center of black plunger. Turn nozzle end up and pull plunger back slightly (1/8″).
• Allow air bubbles to rise to top. Snap off and save storage cap.
• Push plunger evenly to dispense equal amounts of hardener and resin onto a discardable surface such as a piece of cardboard or the plastic container on the front of this package. Pull back plunger to stop flow.

MIX THOROUGHLY with paddle provided. Epoxy has a working time of 30 minutes.
Apply to surfaces to be joined or repaired. Epoxy will fixture in 1 hour and fully cure in 24 hours. Wipe nozzle clean. Replace cap for storage.
NOTE: Will not bond to polyethylene or polypropylene plastics. This epoxy product is recommended for indoor use only, as the cured epoxy can yellow and darken when exposed to sunlight and the elements.

Suggested Applications: Ceramics, fiberglass, metal, concrete & more!

View Permatex® 2 Ton Epoxy SDS Part One Here

View Permatex® 2 Ton Epoxy SDS Part Two Here

View Permatex® 2 Ton Epoxy Product Information Here

Permatex® 30 Minute High Strength General Purpose Epoxy

Features and Benefits:

Versatile, easy-to-use, general purpose epoxy adhesive is two-part adhesive and filler system that eliminates the need for welding or brazing. Sets in thirty minutes, no clamping needed. Clear appearance. Fills gaps and will not shrink. When cured, can be drilled, sanded, threaded or filed. Resistant to water and solvents. Temperature range -60°F to 180°F (-51°C to 82°C). Permanent strength up to 3500 PSI.

DIRECTIONS:
PROTECT: Work area must be protected from accidental spills.
CLEAN: Surfaces must be clean, dry and free of grease and oil.
PREPARE: Roughen smooth surfaces (using abrasives or sandpaper).
OPEN PACKAGE: Remove Syringe. Turn syringe nozzle end up and pull plunger back slightly (1/8”). Allow air bubbles to rise to top. Snap off and save storage cap.Push plunger to dispense equal amounts of hardener and resin onto discard-able surface such as a piece of cardboard. Mixing paddle will pop out from plunger. Pull back plunger to stop flow. Snap cap back on.
MIX THOROUGHLY: Thoroughly mix with paddle provided for two minutes until evenly coloured.
APPLICATION: Apply small amount of mixture to both surfaces and assemble parts immediately (product sets in approximately 30 minutes). Remove any excess epoxy immediately.
CURE TIME: Usable strength is reached in 8 hours at 72ºF (22ºC). Cooler temperatures may require longer set time.
CLEAN-UP: Attach nozzle cap and store in moulded tray.
WARNING: Adhesive will not bond most polyethylene or polypropylene plastics.

Automobile
Suggested Applications: Ideal for complex, multi-piece assemblies. Bonds rigid materials including ceramic, chrome, fabric, fiberglass, glass, hard plastic, metal, and rubber.

View Permatex® 30 Minute High Strength General Purpose Epoxy Part One SDS Here

View Permatex® 30 Minute High Strength General Purpose Epoxy Part Two SDS Here

View Permatex® 30 Minute High Strength General Purpose Epoxy Product Information Here

Permatex® 500° High Heat Epoxy

Features and Benefits:

Permatex’s 500® High Heat Epoxy is the first and only high temperature liquid syringe epoxy! Ideal for surface repairs with high temperatures such as under-hood automotive & home repair. This high temperature epoxy withstands 2X higher temperatures compared to standard epoxies that traditionally breakdown at 250⁰F. Ideal for under-hood repairs where temperatures can range up at 400⁰F on a hot summer day.

• Seal against many liquids, gasses and common automotive fluids
• Ideal for under-hood automotive applications
• Eliminates need to weld or braze
• Sets in 10 minutes/ Cures in 2 hours
• Bonds to metals, hard plastics, ceramics, glass rubber and more!
• PSI Strength: 2,500

Suggested Applications: Furniture, doors, windows, trim/moulding, decks & more!

Directions:

• For best results: Roughen, remove any grease and oil, clean and dry surfaces to be joined or repaired.
• Remove plastic mixing paddle from center of black plunger. Turn nozzle end up and pull plunger back slightly (1/8″). Allow air bubbles to rise to top. Snap off and save storage cap.
• Push plunger evenly to dispense equal amounts of hardener and resin onto a discardable surface such as a piece of cardboard or the plastic container on the front of this package. Pull back plunger to stop flow.

MIX THOROUGHLY with paddle provided. Epoxy has a working time of 10 minutes.
Apply to surfaces to be joined or repaired. Epoxy will fixture in 2 hours and fully cure in 24 hours. Wipe nozzle clean. Replace cap for storage.
NOTE: Will not bond to polyethylene or polypropylene plastics.

View Permatex® 500° High Heat Epoxy SDS Part One Here

View Permatex® 500° High Heat Epoxy SDS Part Two Here

View Permatex® 500° High Heat Epoxy Product Information Here

Permatex® Black Plastic Welder™

Features and Benefits:

Permatex’s Black Plastic Welder™ forms a tough durable bond to hard and semi-flexible plastics, aluminium, fiberglass and more. This structural adhesive designed for general purpose bonding of a wide variety of materials. Black in colour, ideal for automotive trim, bumper and clip needs.

• Can be drilled, threaded, machined or painted once cured
• Resists weather, high humidity and temperature vibrations
• Ideal for automotive trim, bumper and clips needs
• No-sagging, no clamp formula, UV Stable
• Sets in 5 minutes/ Cures in 10 minutes
• PSI Strength: 3,500

Automobile
Suggested Applications: Bonds rigid materials including ABS, Fiberglass, PVC, Vinyl, FRP, Acrylic, Glass, Styrene, Wood, and SMC.

No directions available.

View Permatex® Black Plastic Welder™ Part One SDS Here

View Permatex® Black Plastic Welder™ Part Two SDS Here

View Permatex® Black Plastic Welder™ Product Information Here

Permatex® Marine H2 Hold Epoxy

Features and Benefits:

Permatex® Marine H2 Hold Epoxy bonds underwater applications without breaking and can be used on both under and above water repairs. This industrial strength waterproof epoxy is ideal for surfaces exposed to salt or freshwater such as portable water tanks, fuel tanks, drains, boats, and more!

• Flexible water-proof adhesive
• Sticks and cures underwater
• Shock and vibration resistant
• Dries off-white
• Sets in 15 minutes/ Cures in 1 hour
• PSI Strength: 4,000

Suggested Applications: Fiberglass, plastics, metal, wood, PVC & more!

Directions:

• For best results: Roughen, remove any grease and oil, clean and dry surfaces to be joined or repaired.
• Remove plastic mixing paddle from center of black plunger. Turn nozzle end up and pull plunger back slightly (1/8″). Allow air bubbles to rise to top. Snap off and save storage cap.
• Push plunger evenly to dispense equal amounts of hardener and resin onto a discardable surface such as a piece of cardboard or the plastic container on the front of this package. Pull back plunger to stop flow.

MIX THOROUGHLY with paddle provided. Epoxy has a working time of 15 minutes.
Apply to surfaces to be joined or repaired. Epoxy will fixture in 1 hour and fully cure in 24 hours. Wipe nozzle clean. Replace cap for storage.
NOTE: Will not bond to polyethylene or polypropylene plastics.

View Permatex® Marine H2 Hold Epoxy SDS Part One Here

View Permatex® Marine H2 Hold Epoxy SDS Part Two Here

View Permatex® Marine H2 Hold Epoxy Product Information Here

Permatex® Plastic Welder™

Features and Benefits:

A structural adhesive designed for general purpose bonding of a wide variety of material such as hard and soft plastics to specified surfaces. Forms a tough, durable bond to most plastics, composites, ceramics, wood in any combination. Fast curing product with gelling of mixed adhesive in 5 – 6 minutes and fixturing in 9 – 10 minutes. NOTE: Will not bond most polyethylene or polypropylene plastics. Bonds hard and soft plastics to specified surfaces. Requires no primers, sets in five minutes at room temperature. Cream appearance. Gap filling to 0.125 inch. Water resistant and good chemical resistance. Temperature range -60°F to 250°F (-51°C to 121°C). Permanent strength up to 3500 PSI.

DIRECTIONS:
PROTECT: Work area must be protected from accidental spills.
CLEAN: Surfaces must be clean, dry and free of grease and oil.
PREPARE: Roughen smooth surfaces (using abrasives or sandpaper)
OPEN PACKAGE: Remove syringe. Using a sharp blade, cut off tips of both nozzles.
DISPENSE: Depress plunger to dispense Part A and Part B. Mix thoroughly on a clean, discardable surface for 2 to 3 minutes until evenly coloured.
APPLICATION: Apply a small amount of mixture to both surfaces and assemble parts immediately (working time is approximately 5 min.). Remove any excess Plastic Weld immediately.
CURE TIME: Usable strength is reached in four hours at 72°F (22°C). Cooler temperature may require longer set time.
CLEAN-UP: Attach nozzle cap and store in moulded tray. NOTE: Adhesive will not bond most polyethyleneor polypropylene plastics.

Automobile
Suggested Applications: Bonds rigid materials including ABS, acrylic, fiberglass, FRP, glass, PVC, SMC, steel, styrene, vinyl, and wood. Use for interior trim, fills cracks, bonds most plastics, and bonds plastic to vinyl.

View Permatex® Plastic Welder™ Part One SDS Here

View Permatex® Plastic Welder™ Part Two SDS Here

View Permatex® Plastic Welder™ Product Information Here