No products in the cart.
Gasketing
Permatex® Aviation Form-A-Gasket® No. 3 Sealant Liquid
Features and Benefits:
Slow-drying, non-hardening brush-top sealant approved for use in aviation as well as automotive applications. Temperature range -65°F to 400°F (-54°C to 204°C); resists gasoline, oil and grease.
DIRECTIONS:
Use brush to apply a thin, even coat to each surface. Allow to air-dry a fewminutes before fastening the parts into position. If thinning is necessary, add 188 proof denatured alcohol. For use on most types of gaskets, machined surfaces and screw thread connections of airplane and automobile engines.
Automobile:
Suggested Applications: Close-fitting machined surfaces, sealing hoses, and solid gaskets.
Marine:
Suggested Applications: Close-fitting machined surfa
Permatex® Copper Spray-A-Gasket® Hi-Temp Sealant
Features and Benefits:
Fast-drying, metallic copper sealant helps dissipate heat, prevents gasket burnout and improves heat transfer. Fills minor surface irregularities. Seals instantly. Fills hot spots and surface imperfections. Temperature range -50°F to 500°F (-45°C to 260°C); resists all types of automotive fluids, especially gasoline. Level 3
DIRECTIONS:
Shake well with repeated agitation. Hold can 6-10 inches away from surface, depending on width of target area. All surfaces can be pre-coated in advance for convenience. Apply to flange surfaces, both sides of gasket and bolt threads. Wait 30 seconds between coats to allow surface to become tacky.
Automobile:
Suggested Applications: Cylinder head gaskets, exhaust manifold gaskets, and other high-temperature applications.
Marine:
Suggested Applications: Cylinder head gaskets, carburettor gaskets, exhaust manifold gaskets and other high-temperature applications
Permatex® Form-A-Gasket® No. 1 Sealant
Features and Benefits:
Fast-drying, hard-setting sealant designed for sealing rigid materials and flanges, or patching holes and joints where permanent assembly is desired. Temperature range -65°F to 400°F (-54°C to 204°C); resists common shop fluids and fuels.
DIRECTIONS:
Use on flanges, both sides of old or new gaskets, threaded and hose connections, cover plates and all semi permanent reassembly work. Clean surfaces thoroughly. Apply a thin, even film. Allow to air dry afew minutes until film becomes “tacky.” Then assemble and tighten into position.
Motorcycle:
Suggested Applications: Freeze plugs, threaded connections, manifold gaskets
Marine:
Suggested Applications: Freeze plugs, threaded connections, manifold gaskets
Permatex® Form-A-Gasket® No. 1 Sealant
Features and Benefits:
Fast-drying, hard-setting sealant designed for sealing rigid materials and flanges, or patching holes and joints where permanent assembly is desired. Temperature range -65°F to 400°F (-54°C to 204°C); resists common shop fluids and fuels.
DIRECTIONS:
- Clean surfaces thoroughly.
- Pierce top and apply a thin, evenfilm to both mating surfaces. Allow to air dry until it becomes “tacky.”
- Assembleand tighten into position.
- Wipe excess clean. If material cures in nozzle between applications, use a pin or paper clip to remove cured plug.
Motorcycle:
Suggested Applications: Freeze plugs, threaded connections, manifold gaskets
Marine:
Suggested Applications: Freeze plugs, threaded connections, manifold gaskets
Permatex® Form-A-Gasket® No. 2 Sealant
Features and Benefits:
Slow-drying, non-hardening sealant approved for use in aviation as well as automotive applications. Temperature range -65°F to 400°F (-54°C to 204°C); resists gasoline, oil and grease.
DIRECTIONS:
Use on flanges, on both sides of old or new gaskets, threaded and hose connections, cover plates and all semi permanent reassembly work. Clean surfaces thoroughly. Apply a thin, even film. Allow to air dry a few minutes until the film becomes “tacky.” Then assemble and tighten into position.
Automobile:
Suggested Applications: Suggested Applications: Valve cover gaskets, and oil pan gaskets.
Marine:
Suggested Applications: Valve cover gaskets, oil pan gaskets
Package Sizes: 11 oz. tube boxed, 1.5 oz. tube carded, 3 oz. tube carded
Permatex® Gasket Remover – Low VOC Formula
Features and Benefits:
This low VOC formulation combines powerful gasket remover strength with an innovative delivery system. Its fast-foaming action penetrates the most stubborn or baked-on gaskets in 15-20 minutes. The built-in brush-tip was designed for easy application and allows for scrubbing on intricate surfaces. This product is NOT recommended for use on silicone gaskets. Level 2
DIRECTIONS:
- Apply Gasket Remover by depressing pad to angle brush. Move brush in a circular motion ensuring all of the sealant is covered.
- Allow Gasket Remover to stand on the gasket sealant for at least (15) minutes. Removal time will vary depending on gasket sealant thickness.
- Wipe residue off with dry rag.
- Re-apply if necessary.
- Prep flange for new gasket by cleaning with Permatex® Brake & Parts Cleaner.
NOTE: Not for use on RTV silicone gaskets.
Automobile:
Suggested Applications: Removes solvent-based gasketing and gasket sealant products including all Permatex® Form-A-Gasket ®, Spray-A-Gasket®, Indian Head®, High Tack™ Gasket Sealants and Dressings, and residual gasket material.
Heavy Duty:
Suggested Applications: Engine valve connectors, oil pan covers
View Permatex® Gasket Remover – Low VOC Formula SDS HERE
View Permatex® Gasket Remover – Low VOC Formula Product Information HERE
Permatex® High Tack™ Gasket Sealant
Features and Benefits:
Fast-drying all-purpose sealant dries to a highly tacky, non-brittle film. A reliable general adhesive remains tacky indefinitely can be applied in advance for convenience in assembly. Remains effective at temperatures of -65°F to 500°F (-54°C to 260°C). Sensor-safe. Resists gasoline, oil, antifreeze, axle lube, kerosene, propane and butane.
DIRECTIONS:
Apply a thin, even coat of High Tack™ to all surfaces. Cover all threads. Allow to set a few minutes before assembly. For convenient assembly, coat gaskets and bolts in advance. High Tack™ can be removed with lacquer thinner. Keep tightly closed.
Automobile:
Suggested Applications: Valve covers, fuel pumps, carburetors, manifold gaskets; Spray-A-Gasket® seals all felt, cork, metal, paper, and rubber.
Package Sizes: 4 oz. brush-top can, 16 oz. brush-top can
Permatex® High Tack™ Spray-A-Gasket™ Sealant
Features and Benefits:
Fast-drying all-purpose sealant dries to a highly tacky, non-brittle film. A reliable general adhesive remains tacky indefinitely can be applied in advance for convenience in assembly. Remains effective at temperatures of -65°F to 500°F (-54°C to 260°C). Sensor-safe. Resists gasoline, oil, antifreeze, axle lube, kerosene, propane and butane. Aerosol Level 3
DIRECTIONS:
Shake well. Spray a thin, even coat on flange surfaces, both sides of gasket and bolt threads. Allow to set for a few minutes before assembly.
Automobile:
Suggested Applications: Valve covers, fuel pumps, carburetors, manifold gaskets; Spray-A-Gasket® seals all felt, cork, metal, paper, and rubber
Motorcycle:
Suggested Applications: Clutch release cover, cylinder head gaskets
Package Sizes: 6 oz. aerosol can, 4 oz. net wt., 12 oz. aerosol can, 9 oz. net wt.
Permatex® High Temperature Anaerobic Flange Sealant
Features and Benefits:
A high temperature sealant specially engineered for making or dressing gaskets in rigid assemblies. Able to withstand temperatures to 400°F (204°C), fills gaps up to 0.020” (primed) and permits clamping loads to be maintained for strong, leakproof assemblies.
DIRECTIONS:
TO MAKE A GASKET:
- Clean both flange surfaces. Remove paint, dirt, grease or old gasket completely.
- Spray Permatex® Surface Prep™ activator on one surface only. Allow to dry 1-2 minutes.
- Apply a continuous bead of sealant to the unprimed surface.
- Assemble mating surfaces with minimal lateral movement. Excess sealant can be wiped awaywith a cloth and shop solvent.
TO DRESS A GASKET:
- Clean both flange surfaces. Remove paint, dirt, grease or old gasket completely.
- Spray Permatex® Surface Prep™ activator to both flange surfaces. Allow to dry 1-2 minutes.
- Completely cover both sides of the precut gasket with sealant.
- Place coated gasket on flange, and assemble mating surfaces with minimal lateral movement.
Automobile:
Suggested Applications: Water pumps, thermostat housings, engine cases, timing covers, transmission pans, transmission case covers, and transaxle casings.
View Permatex® High Temperature Anaerobic Flange Sealant SDS HERE
View Permatex® High Temperature Anaerobic Flange Sealant Information HERE
Permatex® MotoSeal® 1 Ultimate Gasket Maker Grey
Features and Benefits:
For two and four cycle engines. Solvent-based bond fully seals within 20 minutes. Forms a tough flexible bond that is highly effective on irregular and uneven joint surfaces. Resists gasoline and other damaging fluids. Withstands temperatures 350°F (177°C) continuous, 400°F (204°C) intermittent.
DIRECTIONS:
- Make sure that surfaces to be sealed are clean and oil free.
- Apply a continuous bead of MotoSeal™ 1 to both surfaces of parts to be sealed.
- Smooth material with small brush.
- Wait about one (1) minute then mate parts together.
- Bolt parts using normal torque specifications.
Automobile:
Suggested Applications: Transmission case halves, valve covers, center and end covers (transmissions), crank case halves, cam covers, timing chain cases, primary drives, side covers, and clutch housings.
Motorcycle:
Suggested Applications: Case halves, carburetor gaskets
View Permatex® MotoSeal® 1 Ultimate Gasket Maker Grey SDS HERE
View Permatex® MotoSeal® 1 Ultimate Gasket Maker Grey Information HERE
Permatex® PermaShield™ Fuel Resistant Gasket Dressing & Flange Sealant
Features and Benefits:
Specially formulated for superior fluid resistance, this polyester urethane based gasketing compound withstands extreme temperature changes without hardening. Its non-setting, non-hardening character remains tacky even with rapid changes in temperature, enabling repeated assembly and disassembly of parts. Suitable as either a gasket maker or dressing, PermaShield™ seals surface imperfections between metal parts and is ideal in high performance applications. With an operating temperature range of -60° to 500°F (-50° to 260°C), this compound resists common engine fluids, including oil, gasoline, ethanol, water and anti-freeze and prevents contamination from moisture and dust.
DIRECTIONS:
- Clean and dry surfaces.
- Apply thin film or bead to both surfaces.
- Allow ample drying time to completely evaporate the solvent.
- Assemble and torque to manufacturers specifications. Seals instantly. May return equipment to service immediately. Replace cap after use. Store below 100°F (38°C).
Automobile:
Suggested Applications: Axle assemblies, hydraulic parts, differential covers, oil pans (cast), water pumps, bearing caps/brackets, gearboxes, hydraulic equipment covers, intake manifold gaskets, and valve cover gaskets.
