Makes a tough, permanent bond on contact. Instantly bonds metal, wood, ceramic, leather, rubber and many other surfaces. Instantly bonds rubber to glass and metal. Heat and water resistant. Easy-to-use. Requires no clamping.
DIRECTIONS:
Surfaces should be clean, dry and free of oil.
Apply uniform coat to both surfaces. Wait ten minutes. MAKE SURE THAT THE SURFACES ARE IN THE EXACT POSITION DESIRED! Join surfaces together.
Weatherproof protectant for wiring and electrical connections. Goes on as a liquid and dries to a vinyl polymer that resists dirt, dust, chemicals, moisture, ensuring that connections stay intact. Brush-top applicator allows coverage without gaps and enables access to tight spaces that roll tape and shrink tubing can’t get to.
NOTES:
For best results, avoid direct sunlight, high humidity and breezy conditions. Follow local electrical codes when doing electrical repair work.
DIRECTIONS:
Always disconnect power before applying.
Stir well before using.
Make sure surfaces are clean and dry.
Apply liquid tape to connection or repair area. Completely coat repair area for an air and water tight seal.
Allow 10 minutes minimum between coats. A minimum of two coats is recommended.
Allow 4 hours minimum dry time before use.
Always allow liquid tape to dry completely before restoring power.
Easy-to-use filler can be drilled, filed, sanded and painted. Forms a long-lasting, metal-tough bond. Works on metal, wood, and concrete. Excellent adhesion to galvanised metal. Repairs cracks or porosity leaks in cast metal parts. Fills small holes, cracks, and perforations. Resists water, oil and gasoline.
DIRECTIONS:
Make sure the surface to be repaired is clean and free of oil and grease. For best results, roughen the surface slightly with sandpaper.
Pierce the seal in the head of the tube. Apply LIQUID METAL FILLER straight from the tube. If desired, use a wet putty knife or spatula to smooth out the repair.
LIQUID METAL FILLER will dry in 3 to 4 hours. For filling deep holes, apply LIQUID METAL FILLER in layers. Allow each layer to dry before adding the next.
Use Acetone or nail polish remover to clean up excess LIQUID METAL FILLER.
Automobile
Suggested Applications: Oil pans, stake bed holes, door panels, and cast metal parts.
A self-fusing silicone repair tape that has been used by the Military for years! An all purpose repair tape that is made out of specially formulated silicone rubber. Contains no adhesives; yet chemically bonds to itself upon contact. Simply stretch and wrap for an airtight, waterproof seal in seconds. Replaces duct tape and electrical tape.
Directions are N/A
Automobile
Suggested Applications: Use to seal, insulate and stop vibration on just about anything you are able to get a couple of wraps around. Seal electrical connections, make emergency fuel or water hose repairs, insulate wiring and hoses, repair leaking pipes and hoses, repair damaged wires and wrap hand tools and grips. Use on connector wires and cables, all kinds of hoses such as garden hoses, vacuum hoses, appliance cords, and radiator hoses.